| Channels | 7 | 4 | - | - |
| Output Pull-up Voltage | Up to 20V | V | - |
| Low Output VOL (Typical) @ 100mA (3.3V Logic Input) | 0.6 | V | - |
| Low Output VOL (Typical) @ 140mA (5.0V Logic Input) | 0.6 | V | - |
| Input Interface Compatibility | 3.3V and 5.0V Micro-Controllers and Logic Interface | - | - |
| Internal Free-Wheeling Diodes | Yes | - | For Inductive Kick-back Protection |
| Input Pull-down Resistors | Yes | - | Allows Tri-Stating the Input Driver |
| Input RC-Snubber | Yes | - | Eliminates Spurious Operation in Noisy Environments |
| ESD | 4kV HBM, 1kV CDM | kV | - |
| Max GND-Pin Continuous Current (TJ < 100C) | 1.0 | A | - |
| Total Device Power Dissipation @ TA = +85C (16-Pin SOIC) | 0.412 | W | - |
| Total Device Power Dissipation @ TA = +85C (16-Pin TSSOP) | 0.277 | W | - |
| Total Device Power Dissipation @ TA = +85C (10-Pin DFN3030) | 0.615 | W | - |
| Thermal Resistance Junction-to-Ambient (16-Pin SOIC) | 97 | C/W | - |
| Thermal Resistance Junction-to-Ambient (16-Pin TSSOP) | 144 | C/W | - |
| Thermal Resistance Junction-to-Ambient (10-Pin DFN3030) | 65 | C/W | - |
| Junction Temperature Range | -55 to 150 | C | - |
| Storage Temperature Range | -55 to 150 | C | - |
| Input Logic High Voltage (VI(on)) | 1.65 | V | VCE = 2V, IC = 300mA |
| Input Logic Low Voltage (VI(off)) | 0.6 | V | II = 250A, IC = 100mA |
| ON State Input Current (II(on)) | 12 - 25 | A | IF = 350mA |
| OFF State Input Leakage (II(off)) | 250 | nA | - |
| Low-Level Output Voltage (VOL(vce-sat)) @ 3.3V, 100mA | 0.6 - 0.75 | V | - |
| Low-Level Output Voltage (VOL(vce-sat)) @ 5.0V, 140mA | 0.6 - 0.75 | V | - |
| ON-State Continuous Current (IOUT(on)) @ 3.3V, 0.6V | 80 - 100 | A | - |
| ON-State Continuous Current (IOUT(on)) @ 5.0V, 0.6V | 80 - 140 | A | - |
| OFF-State Leakage Current (IOUT(on)) | 0.5 | A | VINX = 0V, VOUTX = VCOM =16V |
| Logic High Propagation Delay (tPHL) | 50 - 70 | ns | VINX = 3.3V, Vpull-up = 12V, Rpull-up = 1k |
| Logic Low Propagation Delay (tPLH) | 121 - 140 | ns | VINX = 3.3V, Vpull-up = 12V, Rpull-up = 1k |
| Channel-to-Channel Delay | 15 - 50 | ns | Over recommended operating conditions |
| Input Pull-down Resistance (RPD) | 210k - 390k | | - |
| Input Filter Time Constant () | 9 | ns | - |
| Output Capacitance (COUT) | 15 | pF | VINX = 3.3V, VOUTX = 0.4V |
| Free-Wheeling Diode Forward Voltage Drop (VF) | 1.2 | V | IF-peak = 140mA |
| Free-Wheeling Diode Peak Forward Current (IF-peak) | 140 | mA | - |
